ICR-1601
52
Fixed Mapping
User can assign fixed IP address to map the specific client MAC address by select them then copy, when
targets were already existed in the DHCP Client List, or to add some other Mapping Rules by manually in
advance, once the target's MAC address was not ready to connect.
DHCP Server Setting
Go to Basic Network > LAN & VLAN > DHCP Server Tab.
The DHCP Server setting allows user to create and customize DHCP Server policies to assign IP
Addresses to the devices on the local area network (LAN).
Create / Edit DHCP Server Policy
The router allows you to custom your DHCP Server Policy. If multiple LAN ports are available, you can
define one policy for each LAN (or VLAN group), and it supports up to a maximum of 4 policy sets.
When Add button is applied, DHCP Server Configuration screen will appear.
To Next Page
Loading...
