Advantech ICR-1601 - Enable; Change PIN Code; SIM Function Window; Change PIN Window

ICR-1601
228
Enable / Change PIN Code
Enable or Disable PIN code (password) function, and even change PIN code function.
SIM function Window
Item Setting
Value setting
Description
SIM lock
Depend on SIM card
Click the Enable button to activate the SIM lock function.
For the first time you want to enable the SIM lock function, you have to
fill in the PIN code as well, and then click Save button to apply the setting.
Remaining times
Depend on SIM card
Represent the remaining trial times for the SIM PIN unlocking.
Save
N/A
Click the Save button to apply the setting.
Change PIN
Code
N/A
Click the Change PIN code button to change the PIN code (password).
If the SIM Lock function is not enabled, the Change PIN code button is
disabled. In the case, if you still want to change the PIN code, you have to
enable the SIM Lock function first, fill in the PIN code, and then click the
Save button to enable. After that, You can click the Change PIN code button
to change the PIN code.
When Change PIN Code button is clicked, the following screen will appear.
Change PIN Window
Item
Value Setting
Description
Current PIN
Code
A Must filled setting
Fill in the current (old) PIN code of the SIM card.
New PIN Code
A Must filled setting
Fill in the new PIN Code you want to change.
Verified New
PIN Code
A Must filled setting
Confirm the new PIN Code again.
Apply
N/A
Click the Apply button to change the PIN code with specified new PIN code.
Cancel
N/A
Click the Cancel button to cancel the changes and keep current PIN code.