ICR-1601
86
2.5.2 Virtual Server & Virtual Computer
There are some important Pot Forwarding functions implemented within the router, including "Virtual
Server", "NAT loopback" and "Virtual Computer".
It is necessary for cooperate staffs who travel outside and want to access various servers behind office
router. You can set up those servers by using "Virtual Server" feature. After trip, if want to access those
servers from LAN side by global IP, without change original setting, NAT Loopback can achieve it.
"Virtual computer" is a host behind NAT router whose IP address is a global one and is visible to the
outside world. Since it is behind NAT, it is protected by router firewall. To configure Virtual Computer, you
just have to map the local IP of the virtual computer to a global IP.
To Next Page
Loading...
