Advantech ICR-1601 - First Use Guide; Connecting the Router; Router Startup; Web Browser Configuration

ICR-1601
29
Authentication
1. A Must filled setting
2. By default Auto is
selected
Select the Authentication method for the 3G/4G connection.
It can be Auto, PAP, CHAP, or None.
Priority
1. A Must filled setting
2. String format : integer
Enter the value for the dialing-up order. The valid value is from 1 to 16. It
will start to dial up with the profile that assigned with the smallest
number.
Value Range: 1 ~ 16.
Profile
The box is checked by
default
Check the box to enable this profile.
Uncheck the box to disable this profile in dialing-up action.
Save
N/A
Click the Save button to save the configuration.
Undo
N/A
Click the Undo button to restore what you just configured back to the
previous setting.
Back
N/A
When the Back button is clicked, the screen will return to the previous
page.
Setup 3G/4G Connection Common Configuration
Here you can change common configurations for 3G/4G WAN.
3G/4G Connection Common Configuration
Item
Value setting
Description
Connection Control
By default Auto-
reconnect is selected
When Auto-reconnect is selected, it means it will try to keep the Internet
connection on all the time whenever the physical link is connected.
When Connect-on-demand is selected, it means the Internet connection
will be established only when detecting data traffic.
When Connect Manually is selected, it means you need to click the
Connect button to dial up the connection manually. Please go to Status >
Basic Network > WAN & Uplink tab for details.
Note: If the WAN interface serves as the primary one for another WAN
interface in Failover role( and vice versa), the Connection Control
parameter will not be available on both WANs as the system must set it
to “Auto-reconnect”
Maximum Idle Time
1. An Optional setting
2. By default 600
seconds is filled-in
Specify the maximum Idle time setting to disconnect the internet
connection when the connection idle timed out.
Value Range: 300 ~ 86400.