Advantech ICR-1601 - Virtual Server Rule Configuration

ICR-1601
89
Virtual Server Rule Configuration
Item
Value setting
Description
WAN Interface
1. A Must filled setting
2. Default is ALL.
Define the selected interface to be the packet-entering interface of the
router.
If the packets to be filtered are coming from WAN-x then select WAN-x for
this field.
Select ALL for packets coming into the router from any interface.
It can be selected WAN-x box when WAN-x enabled.
Note: The available check boxes (WAN-1 ~ WAN-4) depend on the number of
WAN interfaces for the product.
Server IP
A Must filled setting
This field is to specify the IP address of the interface selected in the WAN
Interface setting above.
Protocol
Public Port
Private Port
A Must filled setting
When “ICMPv4” is selected
It means the option “Protocol” of packet filter rule is ICMPv4.
Apply Time Schedule to this rule, otherwise leave it as Always. (refer to
Scheduling setting under Object Definition)
Then check Enable box to enable this rule.
When “TCP” is selected
It means the option “Protocol” of packet filter rule is TCP.
Public Port selected a predefined port from Well-known Service, and Private
Port is the same with Public Port number.
Public Port is selected Single Port and specify a port number, and Private
Port can be set a Single Port number.
Public Port is selected Port Range and specify a port range, and Private Port
can be selected Single Port or Port Range.
Value Range: 1 ~ 65535 for Public Port, Private Port.