ICR-1601
44
Define the Start ID for the VLAN and the End ID will be automatically counted
as Start ID + 4.
Click the Save button to save the configuration
Port-based VLAN – Create/Edit VLAN Rules
The port-based VLAN allows you to custom each LAN port. There is a default rule shows the
configuration of all LAN ports. Also, if your device has a DMZ port, you will see DMZ configuration, too. The
maxima rule numbers is based on LAN port numbers.
When Add button is applied, Port-based VLAN Configuration screen will appear, which is including
3 sections: Port-based VLAN Configuration, IP Fixed Mapping Rule List, and Inter VLAN Group Routing
(enter through a button)
To Next Page
