Advantech ICR-1601 - PPTP Setting; Enable PPTP

ICR-1601
153
Besides, for the PPTP client peer, a Remote
Subnet item is required. It is for the Intranet
of PPTP server peer. So, at PPTP client peer,
the packets whose destination is in the
dedicated subnet will be transferred via the
PPTP tunnel. Others will be transferred based
on current routing policy of the gateway at
PPTP client peer. But, if you entered 0.0.0.0/0
in the Remote Subnet field, it will be treated
as a "Default Gateway" setting for the PPTP
client peer, all packets, including the Internet
accessing of PPTP client peer, will go through
the established PPTP tunnel. That means the
remote PPTP server peer controls the flow of
any packets from the PPTP client peer.
Certainly, those packets come through the
PPTP tunnel.
PPTP Setting
Go to Security > VPN > PPTP tab.
The PPTP setting allows user to create and configure PPTP tunnels.
Enable PPTP
Enable PPTP Window
Item
Value setting
Description
PPTP
Unchecked by
default
Click the Enable box to activate PPTP function.
Client
A Must fill setting
Specify the role of PPTP. Only Client role is available for this router. Below are
the configuration windows for PPTP Client.
Save
N/A
Click Save button to save the settings.