Advantech ICR-1601 - Customer Support; Support for North America (NAM); Support for Europe; Support for Asia

ICR-1601
36
2.2 LAN & VLAN
This section provides the configuration of LAN and VLAN. VLAN is an optional feature, and it depends
on the product specification of the purchased gateway.
2.2.1 Ethernet LAN
The Local Area Network (LAN) can
be used to share data or files among
computers attached to a network.
Following diagram illustrates the
network that wired and inter-
connects computers.
Please follow the following instructions to do IPv4 Ethernet LAN Setup.
Configuration
Item
Value setting
Description
IP Mode
N/A
It shows the LAN IP mode for the router according the related configuration.
Static IP: If there is at least one WAN interface activated, the LAN IP mode is
fixed in Static IP mode.
Dynamic IP: If all the available WAN interfaces are disabled, the LAN IP
mode can be Dynamic IP mode.
LAN IP
Address
1. A Must filled setting
2. 192.168.1.1 is set by
default
Enter the local IP address of this device.
The network device(s) on your network must use the LAN IP address of this
device as their Default Gateway. You can change it if necessary.
Note: It’s also the IP address of web UI. If you change it, you need to type
new IP address in the browser to see web UI.