ICR-1601
26
Configure SIM-A / SIM-B Card
Here you can set configurations for the cellular connection according to your situation or requirement.
Note_1: Configurations of SIM-B Card follows the same rule of Configurations of SIM-A Card, here we list
SIM-A as the example.
Note_2: Both Connection with SIM-A Card and Connection with SIM-B Card will pop up only when the
SIM-A First or SIM-B First is selected, otherwise it only pops out one of them.
Connection with SIM-A/-B Card
1. A Must filled setting
2. By default Auto is
selected
Select Auto to register a network automatically, regardless of the
network type.
Select 2G Only to register the 2G network only.
Select 2G Prefer to register the 2G network first if it is available.
Select 3G only to register the 3G network only.
Select 3G Prefer to register the 3G network first if it is available.
Select LTE only to register the LTE network only.
Note: Options may be different due to the specification of the module.
To Next Page
Loading...
