Advantech ICR-1601 - Port-Based VLAN Configuration

ICR-1601
46
Port-based VLAN Configuration
Item
Value setting
Description
Name
1. A Must filled setting
2. String format: already
have default texts
Define the Name of this rule. It has a default text and cannot be modified.
VLAN ID
A Must filled setting
Define the VLAN ID number, range is 1~4094.
VLAN Tagging
Disable is selected by
default.
The rule is activated according to VLAN ID and Port Members configuration
when Enable is selected.
The rule is activated according Port Members configuration when Disable is
selected.
NAT / Bridge
NAT is selected by default.
Select NAT mode or Bridge mode for the rule.
Port
Members
These box is unchecked by
default.
Select which LAN port(s) and VAP(s) that you want to add to the rule.
Note: The available member list can be different for the purchased product.
LAN to Join
1. An Optional Setting
2. The box is unchecked by
default.
Select the LAN to join.
WAN & WAN
VID to Join
All WANs is selected by
default.
Select which WAN or All WANs that allow accessing Internet.
Note: If Bridge mode is selected, you need to select a WAN and enter a VID.
LAN IP
Address
A Must filled setting
Assign an IP Address for the DHCP Server that the rule used, this IP address is
a gateway IP.
Subnet Mask
255.255.255.0(/24) is
selected by default.
Select a Subnet Mask for the DHCP Server.
DHCP Server
/Relay
Server is selected by
default.
Define the DHCP Server type.
There are three types you can select: Server, Relay, and Disable.
Relay: Select Relay to enable DHCP Relay function for the VLAN group, and
you only need to fill the DHCP Server IP Address field.
Server: Select Server to enable DHCP Server function for the VLAN group, and
you need to specify the DHCP Server settings.
Disable: Select Disable to disable the DHCP Server function for the VLAN
group.
DHCP Server
IP Address
(for DHCP
Relay only)
A Must filled setting
If you select Relay type of DHCP Server, assign a DHCP Server IP Address that
the gateway will relay the DHCP requests to the assigned DHCP server.
DHCP Server
Name
A Must filled setting
Define name of the DHCP Server for the specified VLAN group.
IP Pool
A Must filled setting
Define the IP Pool range.
There are Starting Address and Ending Address fields. If a client requests an
IP address from this DHCP Server, it will assign an IP address in the range of IP
pool.
Lease Time
A Must filled setting
Define a period of time for an IP Address that the DHCP Server leases to
a new device. By default, the lease time is 86400 seconds.
Domain
Name
String format can be any
text
The Domain Name of this DHCP Server.
Value Range: 0 ~ 31 characters.
Primary DNS
IPv4 format
The Primary DNS of this DHCP Server.
Secondary
DNS
IPv4 format
The Secondary DNS of this DHCP Server.
Primary
WINS
IPv4 format
The Primary WINS of this DHCP Server.
Secondary
WINS
IPv4 format
The Secondary WINS of this DHCP Server.
Gateway
IPv4 format
The Gateway of this DHCP Server.