Advantech ICR-1601 - Openvpn Client Status; L2 TP Client Status

ICR-1601
252
OpenVPN Client Status
OpenVPN Client Status
Item
Value setting
Description
OpenVPN
Client Name
N/A
It displays the Client name you have entered for identification.
Interface
N/A
It displays the WAN interface specified for the OpenVPN client connection.
Remote
IP/FQDN
N/A
It displays the peer OpenVPN Server’s Public IP address (the WAN IP address)
or FQDN.
Remote Subnet
N/A
It displays the Remote Subnet specified.
TUN/TAP
Read(bytes)
N/A
It displays the TUN/TAP Read Bytes of OpenVPN Client.
TUN/TAP
Write(bytes)
N/A
It displays the TUN/TAP Write Bytes of OpenVPN Client.
TCP/UDP
Read(bytes)
N/A
It displays the TCP/UDP Read Bytes of OpenVPN Client.
TCP/UDP
Write(bytes)
N/A
It displays the TCP/UDP Write Bytes of OpenVPN Client.
Connection
Conn. Time
N/A
It displays the connection time for the corresponding OpenVPN tunnel.
Conn. Status
N/A
It displays the connection status of the corresponding OpenVPN tunnel.
The status can be Connected, or Disconnected.
L2TP Client Status
LT2TP Client Status shows the configuration for establishing LT2TP tunnel and current connection status.
L2TP Client Status
Item
Value setting
Description
Client Name
N/A
It displays Name for the L2TP Client specified.
Interface
N/A
It displays the WAN interface with which the router will use to request
PPTP tunneling connection to the PPTP server.
Virtual IP
N/A
It displays the IP address assigned by Virtual IP server of L2TP server.
Remote IP/FQDN
N/A
It displays the L2TP Server’s Public IP address (the WAN IP address) or
FQDN.
Default
Gateway/Remote
Subnet
N/A
It displays the specified IP address of the gateway device used to connect
to the internet to connect to the L2TP server –the default gateway. Or
other specified subnet if the default gateway is not used to connect to the
L2TP server –the remote subnet.
Conn. Time
N/A
It displays the connection time for the L2TP tunnel.
Status
N/A
It displays the Status of the VPN connection. The status displays
Connected, Disconnect, and Connecting.
Edit
N/A
Click on Edit Button to change L2TP client setting, web-based utility will
take you to the L2TP client page. (Security > VPN > L2TP tab)