Advantech ICR-1601 - Wireless Client List; Select Target Wifi

ICR-1601
71
For others:
For the detail description about VAP configuration, please refer to the description stated in AP-Router
section.
2.3.2 Wireless Client List
The Wireless Client List page shows the information of wireless clients which are associated with
this device.
Go to Basic Network > WiFi > Wireless Client List Tab.
Select Target WiFi
Target Configuration
Item
Value setting
Description
Operation Band
A Must filled setting.
Specify the intended operation band for the WiFi module.
Basically, this setting is fixed and cannot be changed once the module is
integrated into the product. However, there is some module with selectable
band for user to choose according to his network environment.
Under such situation, you can specify which operation band is suitable for
the application.