Advantech ICR-1601 - Plain Text Configuration; Configuration Content

ICR-1601
181
Plain Text Configuration
Item
Value setting
Description
Clean
NA
Clean text area. (You should click Save button to further clean the
configuration already saved in the system.)
Save
NA
Save configuration
The supported plain text configuration items are shown in the following list. For the settings that can
be executed with standard Linux commands, you can put them in a script file, and apply to the system
configure with STARTUP command. For those configurations without corresponding Linux command set to
configure, you can configure them with proprietary command set.
Configuration Content
Key
Value setting
Description
OPENVPN_ENABLED
1 : enable
0 : disable
Enable or disable OpenVPN Client function.
OPENVPN_DESCRIPTION
A Must filled
Setting
Specify the tunnel name for the OpenVPN Client connection.
OPENVPN_PROTO
udp
tcp
Define the Protocol for the OpenVPN Client.
 Select TCP or TCP /UDP
->The OpenVPN will use TCP protocol, and Port will be set as 443
automatically.
 Select UDP
-> The OpenVPN will use UDP protocol, and Port will be set as 1194
automatically.
OPENVPN_PORT
A Must filled
Setting
Specify the Port for the OpenVPN Client to use.
OPENVPN_REMOTE_IPADDR
IP or FQDN
Specify the Remote IP/FQDN of the peer OpenVPN Server for this
OpenVPN Client tunnel.
Fill in the IP address or FQDN.
OPENVPN_PING_INTVL
seconds
Specify the time interval for OpenVPN keep-alive checking.