Advantech ICR-1601 - Page 65

ICR-1601
65
For others:
VAP Configuration
Item
Value setting
Description
SSID
1. String format : Any
text
Enter the SSID for the VAP, and decide whether to broadcast the SSID or not.
The SSID is used for identifying from another AP, and client stations will
associate with AP according to SSID.
Max. STA
The box is unchecked
by default.
Check this box and enter a limitation to limit the maximum number of client
station.
The box is unchecked by default. It means no special limitation on the
number of connected STAs.
Authentication
1. A Must filled setting
2. VAP1: WPA2-PSK is
selected be default;
Others: Open is
selected be default.
For security, there are several authentication methods supported. Client
stations should provide the key when associate with this device.
When Open is selected
The check box named 802.1x shows up next to the dropdown list.
 802.1x (The box is unchecked by default)
When 802.1x is enabled, it means the client stations will be
authenticated by RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When Shared is selected
The pre-shared WEP key should be set for authenticating.
When Auto is selected
The device will select Open or Shared by requesting of client automatically.
The check box named 802.1x shows up next to the dropdown list.
 802.1x (The box is unchecked by default)
When 802.1x is enabled, it means the client stations will be
authenticated by RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key