19
Start Safely
Start the Machine
Before starting the compact tool carrier and operating
the machine, walk completely around the compact tool
carrier and check that it is clear of personnel.
— Clean your footwear and wipe your hands before
using the compact tool carrier.
— Use the handrails or handholds to mount the compact
tool carrier if it is equipped with an operator platform.
Never grab steering or control levers when mounting.
— Position yourself in the manufacturer’s recommended
operating position. The compact tool carrier must be
operated only from the operating position.
Start the compact tool carrier following the specic
procedures in the manufacturer’s operator’s manual.
These procedures will normally include:
— Position all controls in NEUTRAL including the
auxiliary hydraulic control.
— Be sure all brakes are set.
— Familiarize yourself with the warning devices, gauges
and controls.
— Warn all others in the area that you are going to start
the compact tool carrier.
1
2
3
Three Point
Contact
Entry Process
Set Brake
Keep
Bystanders
Away
P
20
Start Safely
Run an Operating Check
WARNING! Avoid possible injury from loss of control.
Know and understand the control pattern and
control modes before operating the compact tool
carrier. Do not modify manufacturer’s control
pattern. Death or serious injury could result from loss
of machine control.
WARNING! Avoid possible injury from fall, run over,
entanglement, exposure to pinch points or tipover.
Never allow riders. This compact tool carrier is
designed for ONE-PERSON operation only. Death or
serious injury could result from allowing riders on this
machine.
Check before operating:
— All instruments, gauges and indicator lights
— Horn and backup alarms (if equipped)
— All control levers for proper operation
— Brakes for proper operation
If there is any indication that an abnormal condition
exists or the controls do not respond correctly, shut
down safely and correct the condition before operating.
Be sure you can control both the speed and direction
before moving. Start, stop, travel and brake smoothly.
Slow down for turns. Slow down for rough, slippery or
soft terrain.
Check
Instruments
and Controls
No
Riders
To Next Page
Loading...
Need help?
General