Maintenance
Changing the Engine Oil and Filter 7.16
85
[en-US] | 08/2022 | 5100064108 | SM100 | Operator’s Manual
Procedure
1. Use a pressure washer or water hose to remove dirt and debris from
the machine’s exterior.
ð To pressure wash areas with labels, direct the water stream at a 90°
angle to the machine surface with the spray nozzle at least
1/3m(1ft) away.
2. Keeping a minimum distance of 1m (3ft) away, use the pressure
washer to rinse the machine.
3. Clean interior and electronic machine components using a damp, clean
cloth.
7.16 Changing the Engine Oil and Filter
WARNING
Health hazard
Most used liquids from this machine contain small amounts of materials that
can cause cancer and other health problems if inhaled, ingested, or left in
contact with skin for prolonged periods of time.
► Take steps to avoid inhaling or ingesting used liquids.
► Wash skin thoroughly after exposure to used liquids.
NOTICE
Engine damage can occur if the oil level is too high or if the incorrect oil is
used.
► Oil must be removed from the engine if the oil level is above the max
line.
► Use only the recommended oil.
NOTICE
Prevent dirt and debris from contaminating the engine oil. Carefully clean the
oil cap, dipstick, and the surrounding area before removing the cap.
Do not mix different types of engine oil. This can adversely affect the lubri-
cating properties of the engine oil.
Environment
Use a suitable container to collect, store, and dispose of drained fluids and
lubricants in accordance with current environmental protection regulations.
7
To Next Page
Loading...
Need help?
General