AEM SM100 User Manual

3
This safety manual is intended to point out some of
the basic safety situations that may be encountered
during the normal operation and maintenance of your
machine and to suggest possible ways of dealing with
these conditions. This manual is NOT a substitute for
the compact tool carrier manufacturer’s operator’s
manual(s).
Additional precautions may be necessary, or some
instructions may not apply, depending on equipment,
attachments and conditions at the worksite or in the
service area. The manufacturer has no direct control
over equipment application, operation, inspection or
maintenance. Therefore, it is YOUR responsibility to
use good safety practices in these areas.
The information provided in this manual supplements
the specic information about your machine that is
contained in the manufacturer’s manual(s). Other
information that may affect the safe operation of
your machine may be contained on safety signs or in
insurance requirements, employer’s safety and training
programs, safety codes, local, state/provincial and
federal laws, rules and regulations.
IMPORTANT! Before you operate the
compact tool carrier, make sure you have the
manufacturer’s manual(s) for this machine and
all attachments. If the manufacturer’s manuals
are missing, obtain replacement manuals from
your employer, equipment dealer or directly
from the manufacturer. Keep this safety manual
and the manufacturer’s manuals with the
machine at all times. Read and understand
all manuals.
Safety videos are available from some
manufacturers. Operators are encouraged to
periodically review the safety video.
Foreword
Read and
Understand
Manuals Before
Operating
4
Safety Alerts
Symbol
This Safety Alert Symbol means: “ATTENTION!
STAY ALERT! YOUR SAFETY IS INVOLVED!”
The Safety Alert Symbol identies important safety
messages on equipment, safety signs, in manuals or
elsewhere. When you see this symbol, be alert to the
possibility of death or personal injury. Follow
instructions in the safety message.
Three Reasons Safety is Important to You:
1. Accidents disable and kill.
2. Accidents cost.
3. Accidents can be avoided.
Signal Words
Signal words are distinctive words that will typically be
found on safety signs on the compact tool carrier and
other worksite equipment. These words may also be
found in this manual and the manufacturer’s manuals.
These words are intended to alert the operator to a
hazard and the degree of severity of the hazard.
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
NOTICE indicates a property
damage message.
DANGER
WARNING
CAUTION
NOTICE

AEM SM100 Specifications

General

Brand	AEM
Model	SM100
Category	Compact Loader
Language	English