To Next Page

To Previous Page

Safety

Safety Guidelines for Maintenance 3.4

[en-US] | 08/2022 | 5100064108 | SM100 | Operator’s Manual

• Secure the attachments against unintentional movement.

• Keep others away from the machine when installing or removing an at-

tachment.

3.4 Safety Guidelines for Maintenance

General maintenance notes

• Follow all instructions in the Maintenance chapter of this operator's man-

ual. For instructions on adjustment, maintenance, and inspection activi-

ties and intervals, see Maintenance on page 67.

• Wacker Neuson requires the machine owner to have maintenance per-

formed under all circumstances. Otherwise, the warranty shall not be

given in full.

• For inspection and maintenance work, ensure all tools and service cen-

ter equipment are capable of performing the tasks prescribed. Do not

use malfunctioning or broken tools. Use certified measuring devices that

are routinely calibrated for accuracy (for example torque wrench, pres-

sure gauge, ammeter).

• Retighten any screws, electrical connections, or hose connections that

may have been loosened during maintenance and repair.

• Recycle scrapped parts and drained fluids according to environmental

and hazardous material requirements. To avoid fire and health hazards,

dispose of soiled shop towels by approved methods.

• If any lockout/support devices are removed for setup, maintenance, or

repair purposes, they must be refitted and checked immediately upon

completion of the maintenance/repair work.

Service training

Before servicing or maintaining the machine, see Safety Guidelines for Op-

erating the Machine on page 14.

Replacing parts and labels

• Spare parts must comply with the technical requirements specified by

Wacker Neuson. Contact your Wacker Neuson dealer for assistance.

• Replace worn or damaged components.

• Replace all missing and hard-to-read labels.

• When replacing electrical components, use components that are identi-

cal in rating and performance to the original components.

• When replacement parts are required for this machine, use only Wacker

Neuson replacement parts or those parts equivalent to the original in all

types of specifications, such as physical dimensions, type, strength, and

material.

AEM SM100 User Manual

Questions and Answers: