Foreword
Machine Documentation 1.3
9
[en-US] | 08/2022 | 5100064108 | SM100 | Operator’s Manual
Write the machine information for your machine on this page. Provide these
numbers to your dealer when you need service parts or information about
your machine.
Machine model
Machine item number
Machine serial number
Engine serial number
Wacker Neuson dealer
Address
Phone number
1.3 Machine Documentation
Keep a copy of the operator’s manual with the machine at all times.
From this point forward in this documentation, Wacker Neuson America Cor-
poration will be referred to as Wacker Neuson or the manufacturer.
For spare parts information, please see your Wacker Neuson dealer, or visit
the Wacker Neuson website at http://www.wackerneuson.com/.
When ordering parts or requesting service information, be prepared to pro-
vide the machine model number, item number, and serial number.
1.4 Expectations for Information in This Manual
This manual provides information and procedures to safely operate and
maintain this machine. For your own safety and to reduce the risk of injury,
carefully read, understand, and observe all instructions described in this
manual.
The manufacturer expressly reserves the right to make technical modifica-
tions, even without notice, which improve the performance or safety stan-
dards of its machines.
The information contained in this manual is based on machines manufac-
tured up until the time of publication. The manufacturer reserves the right to
change any portion of this information without notice.
The illustrations, parts, and procedures in this manual refer to the manufac-
turer’s factory-installed components. Your machine may vary depending on
the requirements of your specific region.
This operator’s manual does not include information on attachments.
Please contact your dealer if you require more information on the machine or
the operator’s manual.
1.5 Manufacturer's Approval
This manual contains references to approved parts, attachments, and modi-
fications. The following definitions apply:
1