AEM SM100 - Towing the Machine

Transportation
Towing the Machine 5.3
33
[en-US] | 08/2022 | 5100064108 | SM100 | Operator’s Manual
4. Stop the engine.
5. Remove the key.
Tying down the machine
▪ Secure the machine to the transport deck using the specified tie-down
points (1) on the machine with certified straps, chains, or cables (2).
1
1
2
Fig.4: Tying down the machine
Unloading the machine
1. Ensure the area behind the access ramp is clear and that access to it
is not obstructed.
2. Drive slowly down the ramp. Raise the lift arm slightly so that the at-
tachment does not touch the ramp or ground.
5.3 Towing the Machine
NOTICE
Machine damage can occur during towing.
► The machine may only be towed out of the immediate risk zone. Then,
load it on a truck or trailer.
► Towing the machine can cause excessive, uneven wear.
► The manufacturer’s warranty shall not apply to accidents or damage
caused by towing.
5