Shutdown
Long-Term Storage 9.1
107
[en-US] | 08/2022 | 5100064108 | SM100 | Operator’s Manual
9 Shutdown
9.1 Long-Term Storage
NOTICE
Allowing the battery to freeze or completely discharge is likely to cause per-
manent damage.
► Periodically charge the battery while the machine is not in use.
► In cold climates, store and charge the battery indoors or in a warm loca-
tion.
Introduction
Extended storage of equipment requires preventive maintenance. Perform-
ing these steps helps to preserve machine components and ensures the ma-
chine will be ready for future use. While not all of these steps necessarily ap-
ply to this machine, the basic procedures remain the same.
When
Prepare your machine for extended storage if it will not be operated for
30days or more.
Preparing for storage
• Complete any needed repairs.
• Replenish or change oils (engine, hydraulic) per the intervals specified in
the periodic maintenance schedule table.
• Grease all fittings.
• Inspect engine coolant. Replace coolant if it appears cloudy, is more
than two seasons old, or does not meet the average lowest temperature
for your area.
• Consult the engine owner’s manual for instructions on preparing the en-
gine for storage.
Stabilizing the fuel
After completing the procedures listed above, fill the fuel tank completely
and add a high-quality stabilizer to the fuel.
• Choose a stabilizer that includes cleaning agents and additives designed
to coat/protect the cylinder walls.
• Ensure the stabilizer you use is compatible with the fuel in your area, fuel
type, grade, and temperature range.
• Use a stabilizer with a biocide to restrict or prevent bacteria and fungus
growth.
• Add the correct amount of stabilizer per the manufacturer’s recommen-
dations.
9
To Next Page
Loading...
Need help?
General