Usage
2.1 Intended Use
12
Operator’s Manual | SM100 | 5100064108 | 08/2022 | [en-US]
2 Usage
2.1 Intended Use
In accordance with this designated use, the machine may only be used for
moving earth, gravel, coarse gravel or ballast, and rubble. It may also be op-
erated with approved attachments for additional applications.
No other applications are designated for the use of the machine. Wacker
Neuson will not be liable for damage resulting from use other than men-
tioned above. The operator alone will bear the risk.
Designated use includes following the instructions set forth in the operator's
manual and following the maintenance schedule.
Machine safety can be negatively affected by performing machine modifica-
tions without proper authority and by using spare parts, equipment, attach-
ments, and optional equipment which have not been approved by Wacker
Neuson. Wacker Neuson will not be liable for damage resulting from unap-
proved parts or unauthorized modifications.
Wacker Neuson shall not be liable for personal injury and/or damage to
property caused by failure to follow the safety instructions on labels and in
this operator's manual, or by not exercising due care when:
• Transporting the machine
• Operating the machine
• Servicing the machine and performing maintenance work
• Repairing the machine
2.2 Unintended Use
The machine shall not be used for transport jobs on public roads unless it is
in compliance with applicable regulations.
Using this machine for any other purpose than described above could per-
manently damage the machine or seriously injure the operator or other per-
sons in the area. Machine damage caused by misuse is not covered under
warranty.
The following are some examples of misuse:
• Using the machine as a ladder, support, or work surface
• Using the machine to carry or transport passengers or equipment
• Using the machine to tow other machines
• Operating the machine outside of factory specifications
• Operating the machine in a manner inconsistent with all warnings found
on the machine and in the operator’s manual
To Next Page
Loading...
Need help?
General