Agilent Technologies EMC Series Programmer's Guide

Chapter 5 227
Language Reference
CALCulate:MARKer Subsection
Default Unit: Matches the units of the trace on which the markers are
positioned.
Front Panel
Access:
Marker, <active marker>, Span Pair
Delta Pair Markers Start Frequency X Value
:CALCulate:MARKer[1]|2|3|4:X:STARt <param>
:CALCulate:MARKer[1]|2|3|4:X:STARt?
Position the start (reference) frequency of the designated band-type marker pair, at
the specified trace X value. The value is in the X-axis units (which is often
frequency or time). Use :CALCulate:MARKer:MODE BAND to select band
markers.
The query returns the current X value start/reference frequency of the designated
marker.
Default Unit: Matches the units of the trace on which the markers are
positioned
Front Panel
Access:
Marker, <active marker>, Delta Pair
Delta Pair Markers Stop Frequency X Value
:CALCulate:MARKer[1]|2|3|4:X:STOP <param>
:CALCulate:MARKer[1]|2|3|4:X:STOP?
Position the stop frequency of the designated band-type marker pair, at the
specified trace X value. The value is in the X-axis units (which is often frequency
or time). Use :CALCulate:MARKer:MODE BAND to select band markers.
The query returns the current X value stop frequency of the designated marker.
Default Unit: Matches the units of the trace on which the markers are
positioned
Front Panel
Access:
Marker, <active marker>, Delta Pair
Marker Read Y Value
:CALCulate:MARKer[1]|2|3|4:Y?
Read the current Y value for the designated marker or delta on its assigned trace.
The value is in the Y-axis units for the current trace (which is often dBm).
Default Unit: Matches the units of the trace on which the marker is positioned
Remarks: This command can be used to read the results of marker
functions such as band power and noise that are displayed in the
marker value field on the analyzer.

Agilent Technologies EMC Series Specifications

General

Brand	Agilent Technologies
Model	EMC Series
Category	Measuring Instruments
Language	English