Agilent Technologies EMC Series Programmer's Guide

258 Chapter 5
Language Reference
MEASure Group of Commands
Measure at Marker
:CONFigure:EMI:MARKer[1|2|3|4]?
:MEASure:EMI:MARKer[1|2|3|4]?
:MEASure:MARKer?
Measures at selected marker. Loads the internal buffer.
Factory Preset
and *RST: Not affected by *RST or Preset.
Key Access:
MEASURE, Meas at Marker
Measure at Marker and Add to List
:MEASure:EMI:MARKer[1|2|3|4]ADD?
Measures at selected marker and adds to signal list.
Factory Preset
and *RST: 1
Key Access:
MEASURE, Marker to List
Setting Max/Min On or Off
:MEASure:EMI:MMIN:STATe OFF|ON|0|1
:MEASure:EMI:MMIN:STATe?
Turns Max/Min View On or Off
Factory Preset
and *RST: Off
Remarks: Max/Min View is active when Max/Min On is selected.
Key Access:
View/Trace, More, Max/Min
Max/Min View ->Max
:MEASure:EMI:MMIN:VIEW MAX|MIN|BOTH
Selects Max trace view.
Key Access:
View/Trace, More, Max/Min View, Max

Agilent Technologies EMC Series Specifications

General

Brand	Agilent Technologies
Model	EMC Series
Category	Measuring Instruments
Language	English