Agilent Technologies EMC Series Programmer's Guide

292 Chapter 5
Language Reference
[:SENSe]:FREQuency Subsection
Full Frequency Span
[:SENSe]:FREQuency:SPAN:FULL
Set the frequency span to full scale.
Factory Preset
and *RST: 800 MHz
Front Panel
Access:
SPAN/X Scale, Full Span
Last Frequency Span
[:SENSe]:FREQuency:SPAN:PREVious
Set the frequency span to the previous span setting.
Front Panel
Access:
SPAN/X Scale, Last Span
Start Frequency
[:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
Set the start frequency.
NOTE In log sweep mode, the minimum start frequency is 10 Hz.
Factory Preset
and *RST: 200 MHz
Range: EMC E7401A: –80 MHz
1
to 1.58 GHz
EMC E7402A: –80 MHz
1
to 3.10 GHz
EMC E7403A: –80 MHz
1
to 6.78 GHz
EMC E7404A: –80 MHz
1
to 13.3 GHz
EMC E7405A: –80 MHz
1
to 27.0 GHz
Default Unit: Hz
Front Panel
Access:
FREQUENCY/Channel, Start Freq
1. 10 Hz minimum in log sweep mode.

Agilent Technologies EMC Series Specifications

General

Brand	Agilent Technologies
Model	EMC Series
Category	Measuring Instruments
Language	English