Agilent Technologies EMC Series Programmer's Guide

Chapter 5 247
Language Reference
HCOPy Subsystem
Front Panel
Access:
Print Setup, Color On Off
Print a Hard Copy
:HCOPy[:IMMediate]
The entire screen is output to the parallel port.
Front Panel
Access:
Print
Form Feed the Print Item
:HCOPy:ITEM:FFEed[:IMMediate]
Sends the printer a command to form feed.
Front Panel
Access:
Print Setup, Eject Page
Page Orientation
:HCOPy:PAGE:ORIentation LANDscape|PORTrait
:HCOPy:PAGE:ORIentation?
Specifies the orientation of the print.
NOTE Landscape mode is not presently supported for PCL-3 printers.
Factory Preset
and *RST: The factory default is Landscape. This parameter is persistent,
which means that it retains the setting previously selected, even
through a power cycle.
Front Panel
Access:
Print Setup, Orientation, Landscape
Print Setup, Orientation, Portrait
Number of Items Printed on a Page
:HCOPy:PAGE:PRINts <integer>
:HCOPy:PAGE:PRINts?
Sets the number of display print outputs sent to print on one piece of paper, before
a form feed is sent.

Agilent Technologies EMC Series Specifications

General

Brand	Agilent Technologies
Model	EMC Series
Category	Measuring Instruments
Language	English