296 Chapter 5
Language Reference
[:SENSe]:POWer Subsection
Factory Preset
and *RST: On
Front Panel
Access:
AMPLITUDE Y Scale, Attenuation
Input Port Power Gain
[:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Turns the internal preamp on or off.
Factory Preset
and *RST: Off
Front Panel
Access: AMPLITUDE/Y Scale, Int Preamp On Off
Input Port Maximum Mixer Power
[:SE
NSe
]:POW
er[:RF
]:MIX
er:RAN
Ge[:U
PPer]
<ampl
>
[:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer]?
Specifies the maximum power at the input mixer.
Factory Preset
and *RST: −10 dBm
Range: –100 dBm to 10 dBm
Default Unit: dBm
Front Panel
Access:
AMPLITUDE/Y Scale, Max Mixer Lvl
Optimize Preselector Frequency
[:SENSe]:POWer[:RF]:PADJust <freq>
[:SENSe]:POWer[:RF]:PADJust?
This command allows user-defined adjustment of the preselector frequency to
optimize its response on the signal of interest.
Factory Preset
and *RST: 0 Hz
Range: –250 MHz to 250 MHz
Default Unit: None. Use the MHz terminator in order for this command to
work.
To Next Page
Loading...
Need help?
General
