248 Chapter 5
Language Reference
HCOPy Subsystem
Factory Preset
and *RST: The factory default is 1. This parameter is persistent, which
means that it retains the setting previously selected, even
through a power cycle.
Range: Integer, 1 or 2
Front Panel
Access:
Print Setup, Prints/Page 1 2
Printed Page Size
:HCOPy:PAGE:SIZE A|B|A3|A4|LETTer|LEGal|EXECutive|LEDGer
:HCOPy:PAGE:SIZE?
Formats the print image for the selected page size. Page size “A” is letter, and page
size “B” is ledger. There is no size standardization for “legal” or “executive.”
Factory Preset
and *RST: The factory default is letter. This parameter is persistent, which
means that it retains the setting previously selected, even
through a power cycle.
Front Panel
Access:
Print Setup, /Page Size
Select Report Type
:HCOPy:REPOrt:TYPE SCREen|REPort
Toggles between screen dump or report.
Remarks: This parameter retains the setting previously selected, even
through a power cycle.
Key Access:
Print Setup, Print Screen Report
To Next Page
Loading...
Need help?
General
