Agilent Technologies EMC Series Programmer's Guide

Chapter 5 289
Language Reference
[:SENSe]:EMI Subsection
Setting the Dwell Time for Range
[:SENSe]:EMI:MEASure:RANGe:DWELl<time>
[:SENSe]:EMI:MEASure:RANGe:DWELl?
Sets the dwell time for ranging for Measure at Marker, Automeasure, and
Remeasure.
Factory Preset
and *RST: 200 ms
Auto Measure Margin On or Off
[:SENSe]:EMI:MEASure:PEAKs:SGTMargin[:STATe]ON|OFF|1|0
[:SENSe]:EMI:MEASure:PEAKs:SGTMargin?
Sets automeasure margin On or Off.
Factory Preset
and *RST: Off
Remarks: If on when automeasuring, only the signals above the margin are
measured and added to the signal list.
Key Access:
MEASURE, More, Auto Measure

Agilent Technologies EMC Series Specifications

General

Brand	Agilent Technologies
Model	EMC Series
Category	Measuring Instruments
Language	English