I-4 Index
Index
pilot-TPC power
SCPI command
, 5-17
softkey
, 4-19
PN
sequence definition
, gloss-3
softkeys
PN15
, 4-20
PN9
, 4-20
power
output, setting
, 3-6
setting
, 3-6
softkey
, 4-21
transmission, control
, 4-28
transmission, control SCPI command
, 5-23
turning ALC off
, 3-7
product overview
, 1-2
program message, SCPI term
, 5-2
programming
example
, 5-35
information
, 1-7, 5-1
Q
query and event SCPI commands, 5-3
query, SCPI term
, 5-2
R
RACH softkey, 4-21
radio frame
, 4-26
range
long code
, 4-18, 5-16
short code vs symbol rate
, 4-23, 5-17
TSlot vs symbol rate
, 4-30, 5-25
rate
symbol vs parameters
, 4-26
symbol vs short code
, 4-23, 5-17
symbol vs TSlot range
, 4-30, 5-25
rear panel
connectors
, 3-11
overview
, 3-11
replaceable parts
, 6-2
response message, SCPI term
, 5-2
reverse channel definition
, gloss-3
RF output, toggling
, 3-6
RF power level, ALC off
, 3-7
S
SCPI commands
BCCH type
, 5-9
channel
type
, 5-10
SCPI commands (Continued)
channel number
, 5-9
channel operating state
, 5-9
command tree
, 5-5
cross-reference table to softkey
, 5-29
data
insertion
, 5-12
pattern
, 5-12
downlink
channel power
, 5-14
long code
, 5-14
interrupt
time
, 5-14
trigger
, 5-14
long code
downlink
, 5-14
uplink
, 5-26
multicode type
, 5-15
optional parameters
, 5-4
overview
, 5-2
Perch1 operating state
, 5-15
Perch2 operating state
, 5-16
phase polarity
, 5-16
pilot TPC power
, 5-17
SFN fixed value
, 5-17
short code
channel 1
, 5-17
channels 2 and 3
, 5-18
symbol rate
, 5-18
system frame number type
, 5-21
TFrame offset
, 5-22
transmission
direction, uplink or downlink
, 5-22
power bits
, 5-23
power control
, 5-23
TSector offset
, 5-23
TSlot offset
, 5-24
uplink
channel or multicode
, 5-26
channel power
, 5-25
interference bits
, 5-25
long code
, 5-26
trigger delay
, 5-28
W Bits
, 5-28
W-CDMA Operating State
, 5-28
SDCCH
definition
, gloss-3
softkey
, 4-21
SFN (system frame number)
bits
, 4-17, 5-16
Fixed Value SCPI command
, 5-17
Fixed Value softkey
, 4-22
Setup softkey
, 4-22
To Next Page
Loading...
