Index
Index I-5
short code
example
, 3-5
range vs symbol rate
, 4-23, 5-17
SCPI commands
channel 1
, 5-17
channels 2 and 3
, 5-18
softkeys
Short Code (channel 1)
, 4-23
Short Code (channels 2 and 3)
, 4-24
softkeys
128 ksps
, 4-3
256 ksps
, 4-4
32 ksps
, 4-2
64 ksps
, 4-3
64 ksps voice
, 4-3
ACCH
, 4-4
BCCH Setup
, 4-4
BCCH Type
, 4-5
Channel #
, 4-5
Channel Setup
, 4-5
Channel State Off On
, 4-6
Channel Type
, 4-6
CRC
, 4-8
cross-reference table to SCPI
, 5-29
Data Insertion
, 4-9
Data Pattern
, 4-10
Down Long Code
, 4-11
DTCH
, 4-11
DTCH+ACCH
, 4-11
DTX
, 4-12
FACH
, 4-12
Fixed
, 4-12
Increment
, 4-13
Interrupt Trigger
, 4-13
Interrupt Value
, 4-13
Link Down Up
, 4-14
Long Code
, 4-14
Multicode #
, 4-15
Multicode Type
, 4-15
Multiplex
, 4-16
Perch Setup
, 4-16
Perch1 Off On
, 4-16
Perch2 Off On
, 4-18
Phase Polarity Normal Invert
, 4-18
Pilot-TPC Power
, 4-19
PN15
, 4-20
PN9
, 4-20
Power
, 4-21
RACH
, 4-21
SDCCH
, 4-21
SFN Fixed Value
, 4-22
SFN Setup
, 4-22
softkeys (Continued)
Short Code (channel 1)
, 4-23
Short Code (channels 2 and 3)
, 4-24
Spread
, 4-24
Symbol Rate
, 4-25
System Frame No.
, 4-27
TFrame
, 4-27
Time Offset
, 4-28
Transmit Pwr Ctrl
, 4-28
TSector
, 4-29
TSlot
, 4-30
Tx Power Bits
, 4-31
Ulink I/F Bits
, 4-31
UPCH
, 4-32
Uplink Mode Chan Multicode
, 4-32
Uplink Power
, 4-34
Uplink Trig Delay
, 4-34
W Bits
, 4-35
W-CDMA Off On
, 4-35
wideband CDMA
, 4-2
ZEROS
, 4-36
specifications
, 2-1
Spread softkey
, 4-24
super frame reset out connector
, 3-11
symbol rate
SCPI command
, 5-18
softkey
, 4-25
versus parameters
, 4-26
versus short code
, 4-23, 5-17
versus TSlot range
, 4-30, 5-25
SYMBOL SYNC OUT connector
, 3-11
system
configuration
, 3-16
frame number (SFN)
bits
, 4-17, 5-16
softkey
, 4-27
type SCPI command
, 5-21
frame number reset (SFN RST)
in connector
, 3-13
out connector
, 3-12
T
tail bits, 4-17, 5-16
tail bits definition
, gloss-2
TFrame
description
, 3-9
offset SCPI command
, 5-22
softkey
, 4-27
Time Offset softkey
, 4-28
time offsets, explanation
, 3-8
timeslots
, 4-26, 5-36