Agilent Technologies G1313A User Manual

20
Installing the Autosampler
Unpacking the Autosampler
Table 4 G1389A - Micro Thermostatted Autosampler Accessory Kit Contents G1329-68715
'HVFULSWLRQ 3DUW1XPEHU
Tubing assembly 5063-6527
CAN cable, 1 m long 5181-1519
Screw cap vials, clear 100/pk 5182-0714
Blue screw caps 100/pk 5182-0717
Label halftray 5989-3890
Vial instruction sheet no PN
Fitting 79814-22406
Hex Key 8710-0060
Wrench 4 mm both ends 8710-1534
Wrenches 1/4 - 5/16 inch 8710-0510
Rheotool socket wrench 1/4 inch 8710-2391
Hex key 4 mm, 15 cm long, T-handle 8710-2392
Hex key 9/64 mm, 15 cm long, T- handle 8710-2394
Hex key 2.5 mm, 15 cm long, straight handle 8710-2412
ESD wrist strap 9300-1408
Finger caps (x3)
*
*
Reorder gives pack of 15
5063-6506
Torque adapter G1315-45003
Front door cooled autosampler G1329-40301
Air channel adapter G1329-43200
Cover insulation no PN
Extended loop capillary 0.25 mm, 180 mm G1329-87302
Fused silica capillary 0.050 mm, 500 mm G1375-87304

Agilent Technologies G1313A Specifications

General

Brand	Agilent Technologies
Model	G1313A
Category	Laboratory Equipment
Language	English