38
Installing the Autosampler
Transporting the Autosampler
Transporting the Autosampler
When moving the autosampler around the laboratory, no special
precautions are needed. However, if the autosampler needs to be shipped
to another location via carrier, ensure:
❏ The transport assembly is parked (see “Park Arm (Park Gripper)” on
page 84);
❏ The vial tray is secured.
If the autosampler is to be shipped to another location, the transport
assembly must be moved to the park position to prevent mechanical
damage should the shipping container be subjected to excessive shock.
Also, ensure the vial tray is secured in place with suitable packaging,
otherwise the tray may become loose and damage internal components.
To Next Page
Loading...
Need help?
General
