258
Introduction to the Control Module
Screens available from the System screen
Screens available from the System screen
System screen Use the Esc key to receive Views on the F5 key. Choose System from the
pull-down menu. This screen shows the last activities in the system.
System - Control Use the F1 key (Control) to select the Autosampler. Here you receive
information about the not-ready conditions if needed. F2 key (Reset) does a
re-initialization of the ALS. Use the F8 key (On/Off) to turn on the
thermostat. The F1 key (Release Vial) releases a vial held in the gripper, the
F2 key (Home Gripper) returns the gripper to the home position and the
F3 key (Park Gripper) parks the gripper in preparation for transport.
To Next Page
Loading...
