Agilent Technologies G1313A User Manual

259
Introduction to the Control Module
Screens available from the System screen
System -
Configuration
Use the Esc key to receive Views on the F5 key. Choose System from the
pull-down menu. Use the F2 key (Configure) to select the ALS. Here you
define further special setpoints for the ALS operation.
Use the F1 key (Interfaces) to access the interface settings (if required).
Use the F2 key (Tray s) to view the detected sample trays.

Agilent Technologies G1313A Specifications

General

Brand	Agilent Technologies
Model	G1313A
Category	Laboratory Equipment
Language	English