Agilent Technologies G1313A User Manual

227
Theory of Operation
Firmware Description
Firmware Updates
Firmware updates can be done using your user interface:
• handheld control module with files from a PC-card or
• Agilent ChemStation with files from floppy disk
The file naming conventions are:
xxxx-vvv.DLB, where
xxxx is the product number, e.g. 1313 for the G1313A Autosampler), and
vvv is the revision number, for example 380 is revision 3.80
For instructions refer to your user interface.
NOTE Update of main system can be done in the resident system only.
Update of the resident system can be done in the main system only.
Figure 41 Firmware Update Mechanism
Resident System Main System
Resident FW update
Main FW update

Agilent Technologies G1313A Specifications

General

Brand	Agilent Technologies
Model	G1313A
Category	Laboratory Equipment
Language	English