271
Specifications
Performance Specifications
Table 63 Performance Specifications Agilent 1100 Series Autosampler (G1313A) and
Thermostatted Autosampler (G1329A).
Valid when standard 900 µl metering head installed.
7\SH 6SHFLILFDWLRQ
Pressure Operating range 0-20 MPa (0-200 bar, 0-2950 psi)
GLP features Early maintenance feedback (EMF), electronic records of
maintenance and errors
Communications Controller-area network (CAN). GPIB (IEEE-448),
RS232C, APG-remote standard, optional four external
contact closures and BCD vial number output
Safety features Leak detection and safe leak handling, low voltages in
maintenance areas, error detection and display
Injection range 0.1 – 900 µl in 0.1 µl increments (recommended 1 µl
increments)
Up to 1800 µl with multiple draw (hardware modification
required)
Replicate injections 1 – 99 from one vial
Precision Typically < 0.5 % RSD of peak areas from 5 – 2000 µl,
Typically < 1 % RSD of peak areas from 2000 – 5000 µl,
Typically < 3 % RSD of peak areas from 1 – 5 µl
Minimum sample
volume
1 µl from 5 µl sample in 100 µl microvial, or 1 µl from
10 µl sample in 300 µl microvial
Carryover Typically < 0.1 %, < 0.05 % with external needle cleaning
Sample viscosity range 0.2 – 50 cp
Sample capacity 100 × 2-ml vials in 1 tray
40 × 2-ml vials in ½ tray
15 × 6-ml vials in ½ tray (Agilent vials only)
Injection cycle time Typically 50 s,
depending on draw speed and injection volume
To Next Page
Loading...
Need help?
General
