Agilent Technologies Medalist i3070 5i Series User Manual

7-18 i3070 Series 5i Help
Replacement Procedures
c The guide rail with runner block can now be removed from the
system. Slide the runner block off the guide rail.
Installation
1 Slide the new runner block onto the guide rail.
2 Reinstall the guide rail in the system.
3 Secure the runner block to the conveyor with two screws.
4 Follow the Installation instructions to install the Zone 2 conveyor
motor.
5 Close all covers/doors.
Runner Block
Guide Rail

Agilent Technologies Medalist i3070 5i Series Specifications

General

Brand	Agilent Technologies
Model	Medalist i3070 5i Series
Category	Test Equipment
Language	English