8-6 i3070 Series 5i Help
Firmware Update
6 Press OK when completed. Remove the SD card and press ESC to return
to the Main menu.
Back Up LCD Touch Panel Firmware
1 Open the Zone 2 door. Insert the SD card into the card slot.
2 On the Setting Mode page, press Manual to switch to Automatic mode.
3 To back up the firmware, select GT → SD.
4 Enter a filename for the backup and press ENT.
5 Press OK to confirm.
6 When the backup is completed, press OK. Remove the SD card and
press ESC to return to the Main menu.
To Next Page
Loading...
