6-2 i3070 Series 5i Help
Troubleshooting
System Diagnostics
Diagnostics (dgn) is the main troubleshooting tool. You can use it to check
the hardware configuration, verify performance, and isolate failures to a
field- replaceable unit (FRU). The Diagnostic tests are structured in such a
way that the failing part is usually indicted by the first few test failures.
Some Diagnostic tests require that a Pin Verification Fixture (PVF, part
number E9988- 67901) be installed on the testhead; other tests require that
it not be installed. The Diagnostics program senses whether a fixture is
installed or not and automatically runs the appropriate tests.
Refer to Diagnostics in the Medalist i3070 online help for information on
the Diagnostics software package, how to run it, what the tests are and
how to use them for troubleshooting.
To Next Page
Loading...
