Agilent Technologies Medalist i3070 5i Series - Press: Ballscrew and Ballscrew Nut

Maintenance
i3070 Series 5i Help 5-5
Press: Ballscrew and Ballscrew Nut
1 Open the Zone 2 door to access the Press.
The ballscrew and ballscrew nut are found at the side of the Press.
2 Use a grease gun to apply a small amount of grease as shown below.
3 Close the door.
Ballscrew
Ballscrew Nut
Press
Apply grease here using
grease gun