Agilent Technologies Medalist i3070 5i Series - Zone 2 Conveyor: Runner Blocks

5-10 i3070 Series 5i Help
Maintenance
Zone 2 Conveyor: Runner Blocks
The Zone 2 conveyor has two horizontal runner blocks and four vertical
runner blocks.
1 Open the rear doors to access the Zone 2 conveyor assembly.
2 Use a grease gun to apply a small amount of grease to the runner
blocks.
3 Close the rear doors.
Zone 2 Conveyor Assembly
Horizontal Runner Block
Horizontal
Guide Rail
Vertical Runner Block