2-2 i3070 Series 5i Help
Touch Panel Functions
Modes of Operation
On the LCD touch panel, the Main page appears when the system is
powered on. Select the mode of operation from the Main page.
A password is required for both Debug and Maintenance modes. The
default password is 1263. Administrators can change the password by
pressing Change Password on the password page.
Table 2- 1 Modes of Operation
LCD Touch Panel Menus Description
Production Mode Start and stop production testing.
• Auto – Begin testing in Auto mode.
• Stop – Stop operation.
Maintenance Mode Calibrate and set up the system for production. The
functions are described in Maintenance Mode on
page 2- 3.
Debug Mode Debug Mode provides buttons to quickly move the
Press to previously taught positions.
To Next Page
Loading...
Need help?
General
