Agilent Technologies Medalist i3070 5i Series User Manual

7-22 i3070 Series 5i Help
Replacement Procedures
Installation
1 Secure the new MPU with the screws removed earlier.
2 Connect the MPU cable to the motherboard. Be sure to align the
connectors properly.
3 Plug in the power cable.
4 Rotate the testhead back into position and stow the hand crank.
Replace the guide bar and fasten the latches.
5 Push the testhead back into the system and tighten the star knobs.
6 Close all doors/covers.

Agilent Technologies Medalist i3070 5i Series Specifications

General

Brand	Agilent Technologies
Model	Medalist i3070 5i Series
Category	Test Equipment
Language	English