1-10 i3070 Series 5i Help
Getting Started
Figure 1-6 Power Up Sequence
1 Main Power Switch
2 Reset button
3 PDU On/Off Switch
5 Controller
4 DUT Power Supply
Table 1- 3 Agilent Medalist ICT system users
User Name Default Password Definition and Permissions
operator Resetme1 For operators who are using the Operator Interface to
test boards.
tcm Resetme1 For operators who are using BT-Basic to test boards.
user Alterme1 For general users or sustaining engineers.
engineer Alterme1 For test developers or sustaining engineers.
calibrate Agilent1 Used for system calibration and maintenance. This
user has administrative rights.
To Next Page
Loading...
