Agilent Technologies Medalist i3070 5i Series - Page 22

2-4 i3070 Series 5i Help
Touch Panel Functions
Zone 1 Zone 1 Motor
FWD – Start forward movement of Zone 1 conveyor.
REV – Start reverse movement of Zone 1 conveyor.
Stop – Stop Zone 1 conveyor.
Zone 1 Stopper
On – Move Zone 1 stopper up.
Off – Move Zone 1 stopper down.
Zone 1 > 2
FWD – Start forward movement of Zone 1 and Zone 2 conveyors.
REV – Start reverse movement of Zone 1 and Zone 2 conveyors.
Stop – Stop conveyors.
Zone 2 Zone 2 Motor
FWD – Start forward movement of Zone 2conveyor.
REV – Start reverse movement of Zone 2 conveyor.
Stop – Stop Zone 2 conveyor.
Zone 2 Stopper
On – Move Zone 2 stopper down.
Off – Move Zone 2 stopper up.
Zone 1 > 2
FWD – Start forward movement of Zone 1 and Zone 2 conveyors.
REV – Start reverse movement of Zone 1 and Zone 2 conveyors.
Stop – Stop conveyors.
Scan Scanner Trigger
ON – Turn selected scanner on.
OFF – Turn selected scanner off.
Scanner
Front – Select front scanner.
Rear – Select rear scanner.
Drawer Drawer Lifter
Up – Move drawer lifter up.
Down – Move drawer lifter down.
To move the drawer lifter, the bottom jig clamp must be unlocked.
Bottom Jig Clamp
Lock – Lock bottom fixture.
Unlock – Unlock bottom fixture.
Table 2- 2 Maintenance
Menu Option/Description