Alcatel-Lucent 7210 SAS-X - Page 357

Virtual Private LAN Services
7210 SAS-X, R6 OS Services Guide Page 357
string
Syntax [no] string text
Context config>service>vpls>sap>dhcp>option>vendor
config>service>ies>sap>dhcp>option>vendor
config>service>vprn>sap>dhcp>option>vendor
Description This command specifies the string in the vendor specific suboption of the DHCP relay packet.
The no form of the command returns the default value.
Parameters text — The string can be any combination of ASCII characters up to 32 characters in length. If spaces
are used in the string, enclose the entire string in quotation marks (“ ”).
system-id
Syntax [no] system-id
Context config>service>vpls>sap>dhcp>option>vendor
config>service>ies>sap>dhcp>option>vendor
config>service>vprn>sap>dhcp>option>vendor
Description This command specifies whether the system-id is encoded in the vendor specific sub-option of Option
82.
server
Syntax server server1 [server2...(up to 8 max)]
Context config>service>ies>if>dhcp
config>service>vprn>if>dhcp
Description This command specifies a list of servers where requests will be forwarded. The list of servers can
entered as either IP addresses or fully qualified domain names. There must be at least one server
specified for DHCP relay to work. If there are multiple servers then the request is forwarded to all of
the servers in the list.
There can be a maximum of 8 DHCP servers configured.
Default no server
Parameters server — Specify the DHCP server IP address.
trusted
Syntax [no] trusted
Context config>service>ies>if>dhcp
config>service>vprn>if>dhcp