Virtual Private LAN Services
Page 358 7210 SAS-X, R6 OS Services Guide
Description This command enables relaying of untrusted packets.
The no form of this command disables the relay.
Default not enabled
snoop
Syntax [no] snoop
Contextconfig>service>vpls>sap>dhcp
Description This command enables DHCP snooping of DHCP messages on the SAP. Enabling DHCP snooping
on VPLS interfaces (SAPs) is required where DHCP messages where Option 82 information is to be
inserted. This includes interfaces that are in the path to receive messages from either DHCP servers or
from subscribers.
Use the no form of the command to disable DHCP snooping on the specified VPLS SAP.
Note: The 7210 SAS-X and 7210 SAS-M
and 7210 SAS-T
(network mode) does not support DHCP
snooping for SDP.
Default no snoop
To Next Page
Loading...
