Alcatel-Lucent 7210 SAS-X - Page 456

Show, Clear, Debug Commands
Page 456 7210 SAS-X, R6 OS Services Guide
Context show>service>id
Description This command displays detailed information for all aspects of the service.
Output Show service ID Output — The following table describes the output fields when the all option is
specified:
Label Description
Service Id
The service identifier.
VPN Id
The number which identifies the VPN.
Service Type
Specifies the type of service.
VLL Type
Specifies the VLL type.
SDP Id
The SDP identifier.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Mgmt Change
The date and time of the most recent management-initiated change.
Endpoint
Specifies the name of the service endpoint.
Flags
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, L2OperDown, RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, SapIngressNamed-
PoolMismatch, SapEgressNamedPoolMismatch, NoSapEpipeRing-
Node.
SAP Count
The number of SAPs specified for this service.
SDP Bind Count
The number of SDPs bound to this service.
Split Horizon Group Specifics
Split Horizon
Group
Name of the split horizon group for this VPLS.
Description
Description of the split horizon group.
Instance ID
Displays the Instance identifier of the split horizon group.
Last Changed
Displays the date and time of most recent change to the split horizon
group.
Split Horizon
Group
Displays the name of the split horizon group the SAP or Spoke SDP is
associated.
Service Destination Points (SDPs)
SDP Id
The SDP identifier.