Alcatel-Lucent 7210 SAS-X - Page 483

VLL Show Commands
7210 SAS-X, R6 OS Services Guide Page 483
Sample Output
*A:DUT-B_sasx>show>service# id 257 sap 1/1/3:64 detail
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 257
SAP : 1/1/3:64 Encap : q-tag
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Last Status Change : 05/19/2000 12:13:40
Last Mgmt Change : 05/20/2000 11:00:53
Loopback Mode : Internal No-svc-port used : 1/1/13
Loopback Src Addr : 00:00:00:22:22:22
Loopback Dst Addr : 00:00:00:11:11:11
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Admin MTU : 1518 Oper MTU : 1518
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
tod-suite : None
Endpoint : x
Acct. Pol : None Collect Stats : Disabled
Ignore Oper Down : Disabled
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1 Egress qos-policy : 1
-------------------------------------------------------------------------------
Sap Egress Policy (1)
-------------------------------------------------------------------------------
Scope : Template
Remark : False Remark Pol Id : 2
Accounting : frame-based
Description : Default SAP egress QoS policy.
-------------------------------------------------------------------------------
Queue Rates and Rules
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId CIR CIR Adpt Rule PIR PIR Adpt Rule
-------------------------------------------------------------------------------
Queue1 0 closest max closest
Queue2 0 closest max closest
Queue3 0 closest max closest
Queue4 0 closest max closest
Queue5 0 closest max closest
Queue6 0 closest max closest
Queue7 0 closest max closest
Queue8 0 closest max closest
No-svc-port used
Displays the port ID of the port on which no service is configured.
This port is used for the port loop back with MAC swap functionality.
Label Description (Continued)